99.9% availability including maintenances. Redundant on at least 3 paths. Ports shutdown automatically to signal circuit failure. It carries any type of Ethernet packets, including MPLS, jumbo frames, VLAN in VLAN.. in VLAN. Capacities from 1 Gbps to 10 Gbps.
The Ultimate Protected Wavelength-like Point-to-Point Ethernet Transport Service
Free 1 Tbps+ Anti-DDoS by Voxility (AS41732)
VOXILITY PSEUDOWIRES
Voxility PSEUDOWIRES
Pseudowire Circuit Between Datacenters in EU and US
A redundant point-to-point Ethernet link that emulates the physical transport layer (e.g., wavelength) between a datacenter in Europe and one in US.
Redundant 1/10 Gbps wavelength-like circuits to connect infrastructure between selected two datacenters.
A pseudowire circuit is a point-to-point Ethernet link that emulates the physical transport layer. It supports any type and features of Ethernet packets including MPLS, jumbo frames, VLAN in VLAN and other packets carrying non-IP traffic. Even packets with layer2 CRC errors are carried to the other end as they were being transported over a physical link. In case connectivity is lost, ports at both end shutdown automatically.
Example Pseudowire Circuit
Product Specifications
GOOD FOR
Anyone that needs to exchange Ethernet traffic on a wavelength-like circuit between a selected datacenter in Europe and one in US.
PURPOSE
Remotely connect to Internet exchanges or Cloud service providers.
Exchange traffic between two locations using MPLS, jumbo frames, VLAN in VLAN, non-IP traffic etc.
Increase VOIP traffic quality.
Replace current wavelengths with circuits that have better uptime and a better price.
DESCRIPTION
A pseudowire circuit emulates an Ethernet physical link between two locations. Packets received from your sides are carried between locations using proprietary technology. In case a route fails, the traffic is rerouted automatically using backups. If the loss of connectivity lasts more than 5 seconds, both end ports of the pseudowire circuit are automatically shut down to signal the event. Ports are automatically turned on again when connectivity is resumed.
All types of Ethernet packets are carried to the other end, including: MPLS, jumbo frames, VLAN in VLAN in VLAN, non-IP, packets with errors etc. The pseudowire service is designed to have zero packet loss, less than 0,1% jitter and keep the order of packets within flows.
LATENCY
Los Angeles – London: XXX ms (up to XXX ms when backup routes is used)
Los Angeles – Amsterdam: XXX ms (up to XXX ms when backup routes is used)
Los Angeles – Frankfurt: XXX ms (up to XXX ms when backup routes is used)
Los Angeles – Vienna: XXX ms (up to XXX ms when backup routes is used)
Los Angeles – Prague: XXX ms (up to XXX ms when backup routes is used)
Los Angeles – Bucharest: XXX ms (up to XXX ms when backup routes is used)
Miami – London: XXX ms (up to XXX ms when backup routes is used)
Miami – Amsterdam: XXX ms (up to XXX ms when backup routes is used)
Miami – Frankfurt: XXX ms (up to XXX ms when backup routes is used)
Miami – Vienna: XXX ms (up to XXX ms when backup routes is used)
Miami – Prague: XXX ms (up to XXX ms when backup routes is used)
Miami – Bucharest: XXX ms (up to XXX ms when backup routes is used)
Ashburn/Reston – London: XXX ms (up to XXX ms when backup routes is used)
Ashburn/Reston – Amsterdam: XXX ms (up to XXX ms when backup routes is used)
Ashburn/Reston – Frankfurt: XXX ms (up to XXX ms when backup routes is used)
Ashburn/Reston – Vienna: XXX ms (up to XXX ms when backup routes is used)
Ashburn/Reston – Prague: XXX ms (up to XXX ms when backup routes is used)
Ashburn/Reston – Bucharest: XXX ms (up to XXX ms when backup routes is used)